K-10000 tower crane
ERECTION SEQUENCE
Simplified Silhouette - Service Crane Omitted
The Component Reference Numbers
hereunder, #1 - #39, represent the general overall Erection Sequence.
#19-22, #28-31 and #34-36 are generally preassembled on the ground.
If the overall height makes a Service Crane required or desired, it could
be installed after three sides of #14 have been installed. The
Service Crane would then finish #14 and bring up #15, 16 and 17.
COMPONENT WEIGHTS - U.S.
| # | COMPONENT | LENGTH | WEIGHT | CG RAD | PRE- | |
| DESCRIPTION | FT | 1,000 lbs | FT | ASSEMBLY | ||
| 1 | Anchor Bolt Base Ring | 29.5 | 0.0 | |||
| 2 | Swing Ring Bearing | 22.0 | 0.0 | |||
| 3 | Rotating Swing Chassis | 151.0 | 0.0 | |||
| 4 | Tower Section, M80 S | 30 | 38.0 | 0.0 | ||
| 5 | Tower Section, M80 S | 40 | 51.0 | 0.0 | ||
| 6 | Tower Section, M80 S | 40 | 51.0 | 0.0 | ||
| 7 | Tower Section, M80 | 40 | 45.0 | 0.0 | ||
| 8 | Tower Section, M80 | 40 | 45.0 | 0.0 | ||
| 9 | Tower Section, M80 | 40 | 45.0 | 0.0 | ||
| 10 | Tower Section, M80 | 40 | 45.0 | 0.0 | ||
| 11 | Elevator, incl. Mast | 46.0 | 16.0 | |||
| 12 | Jib Support Frame | 61.7 | 0.0 | |||
| 13 | Operator's Cabin, incl. Support | 16.5 | 17.0 | |||
| 14 | Tower Section | 30 | 42.1 | 0.0 | ||
| 15 | Tower Section | 40 | 54.8 | 0.0 | ||
| 16 | Tower Section | 20 | 29.4 | 0.0 | ||
| 17 | Tower Head | 10.3 | 0.0 | ___ | ||
| 18 | CW Jib Foot | 10 | 8.3 | 21.3 | ) | | |
| 18A | CW Trolley Winch | 3.4 | 26.0 | ) | | | |
| 19 | CW Jib Section | 40 | 16.6 | 45.1 | ) | Counterweight Jib |
| 20 | CW Jib Section | 40 | 16.6 | 85.3 | ) | #18 - #22 |
| 21 | CW Jib Section | 40 | 16.6 | 124.7 | ) | 80,500 LBS |
| 22 | CW Jib Section | 40 | 19.0 | 164.1 | ) | | |
| 23 | CW Jib Tie Bars | 24.2 | 93.5 | )__ | | | |
| 24 | Inner CW Trolley, w. CW | 182.6 | 34.6 | |||
| 25 | Outer CW Trolley, w. CW | 88.2 | 178.0 | |||
| 26 | Fixed CW | 220.0 | 179.0 | ___ | ||
| 27 | Jib Foot | 10 | 11.5 | 18.7 | ) | | |
| 28 | Jib Section | 40 | 27.0 | 43.0 | ) | | |
| 28A | Trolley Winch | 5.3 | 25.8 | ) | | | |
| 28B | Ultra Hoist Winch, excl. Rope | 27.5 | 39.8 | ) | Inner Jib Half | |
| 28C | Hoist Winch, excl. Rope | 27.5 | 52.3 | ) | #27 - #31 | |
| 29 | Jib Section | 40 | 27.0 | 82.3 | ) | 180,700 lbs |
| 30 | Jib Section | 40 | 27.0 | 121.8 | ) | | |
| 31 | Jib Section | 40 | 27.9 | 161.1 | )__ | | |
| 32 | Jin Tie Bars, Lower+B4 | 17.0 | 81.3 | |||
| 33 | Strut Tower | 60 | 9.0 | 193.3 | ___ | |
| 34 | Jib Section | 40 | 27.0 | 200.5 | ) | | |
| 35 | Jib Section | 40 | 27.9 | 239.8 | ) | Outer Jib Half |
| 36 | Jib Section | 30 | 12.2 | 272.7 | ) | #34 - #37 |
| 37 | Load Trolleys, incl. Truss | 28.4 | 269.0 | )__ | 95,500 lbs | |
| 38 | Jib Tie Bars, Upper | 14.9 | 81.3 | |||
| 39 | Jib Tie Bars, Outer | 10.2 | 197.8 | |||
| 40 | Hoist Cable | 12.5 | 52.3 | |||
| 41 | Ultra Hoist Cable | 12.0 | 39.8 | |||
| Total, w/o Load | 1,730.6 | |||||
| Total w. 264,000 lbs Hook Load | 1,994.6 | |||||
| Service Crane, RICHIER 1296 | 120.0 | |||||
| TOTAL WEIGHT, 1,000 LBS | 2,114.6 | |||||
